Difference between revisions of "User:Pmcg521"
From REU@MU
| Line 44: | Line 44: | ||
<tr><td> Tested the LED program in updated Assembly code. Began testing the Serial Port Transceiver driver for the Pi 3</td></tr> | <tr><td> Tested the LED program in updated Assembly code. Began testing the Serial Port Transceiver driver for the Pi 3</td></tr> | ||
<tr><td> Read about Raspberry Pi bare metal programming via online sources</td></tr> | <tr><td> Read about Raspberry Pi bare metal programming via online sources</td></tr> | ||
| + | <tr><td> Read ARM processor documentation about configuring UART clock frequency</td></tr> | ||
| + | <tr><td> Used the oscilloscope in attempt to obtain the clock frequency of the UART pin</td></tr> | ||
</table> | </table> | ||
Revision as of 15:00, 12 June 2017
Patrick J. McGee
Error creating thumbnail: Unable to save thumbnail to destination |
|
Logs
| Week 1: May 30-June 2 |
|---|
| Began attempts to boot the full version of Embedded Xinu kernel with Raspberry Pi 3 |
| Researched a Linaro Cross-Compiler to use for its Cortex A-53 ARM processor with ARMv8 architecture |
| Drew diagrams of the boot sequence and compilation for better understanding of the Pi 3's mechanisms |
| Traced through the dynamics of written Assembly code in the full research version of Xinu |
| Week 2: June 5-9 |
| Tested the LED program in updated Assembly code. Began testing the Serial Port Transceiver driver for the Pi 3 |
| Read about Raspberry Pi bare metal programming via online sources |
| Read ARM processor documentation about configuring UART clock frequency |
| Used the oscilloscope in attempt to obtain the clock frequency of the UART pin |
