User:Jpfeiffer1
From REU@MU
Revision as of 15:53, 17 June 2019 by Jpfeiffer1 (Talk | contribs)
| Week 1: May 28 - May 31 |
|---|
| Had program overview and went over potential research topics . |
| Started by looking at the serial port issues that would surface during the semester of Operating Systems while using XINU with the raspberry pi 3 b+. Our first step was to identify the issue, and what was the common cause. |
| After finding an issue with the hardware attached to the raspberry pis we looked at how the transceivers were implemented with the MIPs router and looked into porting implementation over to the RPI 3B+. |
| Once we found how the transceiver boards were implemented on the MIPS routers, we developed a prototype and to test with the RPI3 B+, and it worked! |
| We created a couple more with the parts we had and tested them as we went. |
| Week 2: Jun 3 - Jun 7 |
| Looked at the current network configuration with Xinu |
| Researched Power over Ethernet option for the Raspberry Pi B+ boards |
| Explored current market options for Power over Ethernet HAT (Hardware Attached On Top) for the Raspberry Pi |
| Configured current network switch to enable POE |
| Tested POE switch with IP Phone and explored CLI (Command Line Interface) options for powering on and off boards |
| Week 3: Jun 10 - Jun 14 |
| Week 4: Jun 17 - Jun 21 |
| Week 5: Jun 24 - Jun 28 |
| Week 6: Jul 1 - Jul 5 |
| Week 7: Jul 8 - Jul 12 |
| Week 8: Jul 15 - Jul 19 |
| Week 9: Jul 22 - Jul 26 |
| Week 10: Jul 29 - Aug 2 |
